Product image for ECO sandblasting vessel with white pot with 90° conical head and chassis
Product image for ECOS sandblasting vessel with white vessel on legs with 60° conical head

Sandblasting Vessel ECO / ECOS

The ECO and ECOS sandblasting vessels are used in various areas for the treatment of surfaces.

While the ECO model has a 90° conical head, the ECOS has a steeper 60° conical head - ideal for slower-flowing blasting materials.

In our production we manufacture sandblasting pots with:

  • 5 - 500 litre volume
  • 6 - 12 bar pressure
  • 258 - 800 mm diameter
  • C-steels and stainless steels
  • all standard connections and individual connections
  • optionally on a chassis or in upright, suspended or forklift-mounted installation

Additional Options

To customise the sandblasting pots to your requirements, you can add a range of additional options.

Drawing of the internal pipework with two pipes positioned and connected at right angles to each other

Internal pipework

Integrate precisely fitting pipework to close the vessel with a pop-up.

Drawing of a cross-section of a larger funnel with a wide opening at the bottom and a sieve inserted in it. Above this is a lid with a handle on the upper side for optional closure of the funnel

Funnels, sieves & lids

Filter out coarse particles during filling and protect the blasting material from dust and moisture.

Drawing of a cone-shaped pop-up with an O-ring and an umbrella above it, which covers the other components for protection

Pop-Up, O-Ring and umbrella

The pop-up and O-ring close the vessel for pressurisation and are protected by the umbrella.

Drawing of a two-part locking ring consisting of a ring with a larger diameter and a second funnel-like ring that can be inserted into the larger one and fastened with screws

Two-part locking ring

Makes maintenance and replacement of parts quicker and easier.

Drawing of an elongated compressed air distributor with several inlets and outlets

Compressed air distributor

Distributes the pressure and thus also the blasting material in pots with several outlets.

Drawing of a spray bottle to symbolise the possibility of coating the surface of a container

In-house coating

We paint your vessel according to our standard or to your desired RAL colour.

Your Advantages

  • can be customised (size, pressure, connections, pipework, pop-up, lid, sieves)
  • can be installed as required with a chassis, on legs, standing on forklift pockets or suspended
  • two-piece locking ring possible for easier and faster maintenance work
  • top quality thanks to reliable quality management system
  • more than 85 years of experience in vessel construction speak for your safety
  • certified to various national and international standards

Structure

  1. Lids and sieves up to 610 mm
  2. Umbrella as access protection and relief for the pop-up
  3. Further outlets and connections possible on request
  4. Locking ring: one-piece or two-piece
  5. Pop-up with O-ring
  6. Internal pipework with 1¼" or ½" in the standard
  7. Hand hole in 3 sizes: 80/120 mm, 100/150 mm, 150/200 mm
  8. Conical head with 60° or 90°
  9. Outlets in the cone with 1¼" or ½" in the standard
  10. Chassis or alternatively support legs, forklift pockets or suspended installation
Drawn cross-section of a sandblasting vessel type ECO with 90° cone. Labelling shows, from top to bottom, where the lid, sieves, umbrella, additional connections, sealing rings, pop-up, internal piping, hand hole, cone, outlets in the cone and chassis are located.

Our Standard Sizes

We offer a range of standard sizes for each model, the components of which are always available for you. You can equip our standard vessel with various additional options according to your requirements.

ECO

VOLUME
(Litre)
PRESSURE
(bar)
DIAMETER
(mm)
206 - 12256
406 - 12358 - 408
506 - 12358 - 408
606 - 12358 - 408
1006 - 12508
1506 - 12508
2006 - 12610
3006 - 12610

ECOS

VOLUME
(Litre)
PRESSURE
(bar)
DIAMETER
(mm)
406 - 12408
606 - 12408
1006 - 12508
2006 - 12610
3006 - 12610

We find the right blasting vessel for you

Not sure which blast pot is right for you? Our sales team will be happy to help you choose the right one and customise it perfectly to your demands!

Contact us by phone or email and let us give you professional advice.

This could be interesting for you

What are you looking for?

Contact us!

Are you looking for a strong partner for your demanding projects in the field of pressure vessels and pressurised assemblies? 

We are looking forward to your message!

Phone: +49 271 405 708-0